MICRO IV docking station - Bump Test & Calibrate 1 to 6 Instruments, By GFG Instrumentation

MICRO IV docking station - Bump Test and Calibrate 1 to 6 Instruments simultaneously! By GFG Instrumentation

Product Details: MICRO IV docking station - Bump Test and Calibrate 1 to 6 Instruments simultaneously! By GFG Instrumentation. The MICRO IV docking station is a trendsetting device management system, which enormously reduces cost of ownership and duration of the calibration. The docking station checks the acoustic and optical alarm functions, device errors, alarm thresholds and response times of the MICRO IV.

The bump-test comprises:

Response time
Alarm thresholds
Alarms (optical and acoustic)
Device software
Device- and software identification
Device errors

Up to 6 MICRO IV can be checked for utilizability (bump-test) and be calibrated simultaneously.

Simplest operation:

The docking station reduces the daily time involved for calibration and function test (bump test) dramatically. Already few calibrations and function checks annually reduce the cost of ownership considerably.

The uncomplicated and quick operation in connection with the self-describing traffic lights signals prevent from user mistakes.

Red = failure
Gelb = test running
Grün = device ok!

Due to the compact size the station can be placed almost everywhere without any problems. No further modules or master stations are necessary.

Micro IV Part & Accessory Pricing:

1419-204 Single Micro IV calibration and data download station (includes cable and software). Requires fixed flow regulator with on/off knob and tubing
1419-202 3-unit Micro IV docking station with power supply, PC interface cable and software. Requires Demand Flow Regulator and tubing
1419-201 6-unit Micro IV docking station with power supply, PC interface cable and software. Requires Demand Flow Regulator and tubing
1419-203 Databank-software for automatic saving of device parameters On Request
7776-004 Calibration Kit. Includes carrying case, 0.5 lpm fixed flow regulator, calibration adapter and tubing
1419-216 Demand Flow Regulator for disposable cylinders with inside thread (aluminum and 103 L steel)
1419-217 Demand Flow Regulator for high pressure, refillable cylinders
1419-218 Pressure switch for high pressure bottles, including T-piece for mounting to the fitting type 2003
2603-020 Regulator, 0.5 lpm fixed flow with pressure gauge and on/off knob For cylinders with outside thread (34 L steel)
2603-025 Regulator, 0.5 lpm fixed flow with pressure gauge and on/off knob For cylinders with inside thread (aluminum and 103 L steel) Not for use with chlorine (Cl2)
2603-026 Regulator, 1 lpm fixed flow with pressure gauge and on/off knob For cylinders with inside thread (aluminum and 103 L steel) Required for use with chlorine (Cl2)
1318-911 Motorized Sample Draw Pump with tubing and wand
7711-004 Manual Hand Aspirator with tubing and wand
1318214 Rubber Boot (top and bottom)
7770-201 Calibration Adapter with tubing
7770-201C Calibration Adapter with tubing for chlorine (Cl2)