Gas Monitor Pac 5000 CO By Dräger 4543846

Catalog #4543846

Pac 5000 CO Monitor By Dräger 4543846

Dräger Pac 5000 is the innovative single gas instrument for personal gas detection in work places with a continuous concentration display. The maintenance-free instrument will be used for the reliable monitoring of ambient air and gives a fast warning of harmful concentrations of carbon monoxide from 0-500 ppm. Dräger Pac 5000 is tailor-made for numerous applications during daily work with the following features: - Small and robust - Easy to operate - Large concentration display - New sensor technology - Bump test mode - Adjustable operation timer - Event Logger The instrument was designed for long operation time without replacing the sensor. Using a PC with installed software, the IR interface enables the user to perform easy configuration, calibration, and downloading of the event logger. Small and robust Size and weight of Dräger Pac 5000 are perfect for personal monitoring. The housing of the small and ergonomic instrument is covered with rubber. The instrument meets the requirements of IP 65. An alligator clip provides secure attachment of the unit to the wearer. Easy to operate Once activated, the instrument can be used for over 2 years maintenance-free. With only two buttons the operation is intuitive. To avoid misuse button function can be blocked. An easy to change lithium battery powers the instrument. Concentration display The large and language-independent display continuously shows the concentration with large digits. In case of an alarm or on a button press, the backlight provides a clear readout. New sensor technology The new Dräger XXS sensors react rapidly due to very fast electro-chemical reaction times and a very short diffusion path. Bump test mode Dräger Pac 5000 is equipped with a bump test mode. If it is necessary to check the calibration by performing a bump test a notice icon will light in the display. The bump test period can be adjusted by the user. The bump test can be performed manually or automatically. A Bump Test Station is available. The bump test adjustments can be activated using the PC software Pac Vision or CC Vision. The result of the bump test (passed or failed) will be stored in the event logger.