Self-Retracting Lanyard - Dyna-Lock® 20 Foot Stainless Steel, By MSA P/N 10017931,
Self-Retracting Lanyard - Dyna-Lock® 20 Foot Stainless Steel, By MSA P/N 10017931
Dyna-Lock™ 20' Wire Rope SRL
�� No factory re-certification required
�� Arrests Fall within 20 inches
�� Three independent locking/braking mechanisms
�� Integral shock absorber limits fall arrest forces to 900 pounds
�� Visual impact-load indicator on snaphook
�� 20í wire rope available in stainless steel
�� Additional Lifeline reserve
�� Swivel snaphook to help prevent birdcaging or kinking of lifeline
�� Roller Nozzle reduces wear on cable
�� Durable Stainless Steel and extruded aluminum housing
�� Light weight
�� Integral carrying/mounting handle
�� Meets all applicable OSHA and ANSI standards
The Dyna-Lock is designed to allow freedom of movement for workers that are
exposed to fall hazards. As a worker moves, the lifeline automatically extends and
retracts to keep the lifeline out of the workersí way, thus creating a safer work
environment. Itís durable steel and aluminum housing, as well as the corrosion
resistant internal components, will provide years of service. Without a factory
re-certification requirement, the cost of ownership of a MSA mechanical product
is lower than ever.
The MSA Dyna-Lock Self-Retracting Lanyards (SRL) are fast-acting fall arresters that
limit free-fall distance, deceleration distance and fall arrest forces while allowing user
freedom of movement. The Dyna-Lock SRL is ideal for climbing applications where
vertical mobility is needed.
Three independent locking mechanisms provide proven dependability in corrosive
or freezing environments.
Integral shock absorber limits fall arrest forces to 900 lbs or less.
Visual impact loading indicator on snaphook that alerts the user when the unit has
been subjected to a load.
Wire rope available in galvanized or stainless steel.
Swivel snaphook to prevent birdcaging or kinking of lifeline.
Roller nozzle reduces wear on cable.
Durable stainless steel and extruded aluminum housing on web Dyna-Lock SRL’s.
Durable galvanized steel housing on cable Dyna-Lock SRL’s.
Integral carrying/mounting handle.
4.5 feet per second locking speed.
Roughneck™ models available, which incorporates a black corrosive-resistant
coating designed for severe environmental conditions. All Dyna Locks with the exception of the backpacker feature theHL2000S Self Locking Snap Hook. The Backpacker, under another listing, features the RL20 Self Locking Snap Hook.
Approvals and Standards; Meets ANSI Z359.1, ANSI A10.14, and applicable OSHA standards. Models with
CSA part numbers are CSA certified.
*400 lbs capacity applies to the following models:
20’ web Dyna-Lock, 50’, 70’, & 95’ cable Dyna-Locks.
Capacity (working load)
For 30’, 50’, 70’, 95’ cable, and 20’ web Dyna-Lock Models:
• Maximum: 400 lbs (181 kg)
• Minimum: 75 lbs (34 kg)
For 20’ cable Dyna-Lock Models:
• Maximum: 310 lbs (140 kg)
• Minimum: 75 lbs (34 kg)
Arrest Force
• 75 - 310 lbs < 900 lbf (4 kN)
• 311 - 400 lbs < 1800 lbf (8 kN)
Arrest Distance
• 75 - 310 lbs < 40 in (101.6 cm)
• 311 - 400 lbs < 54 in (137 cm)
Dyna-Lock® SRL Ordering Information;
P/N 506202 CSA P/N 10006470 Dyna-Lock SRL, galvanized wire rope, HL2000S, 10M (30’);
506204 10006468 16M (50’);
506206 10006466 22M (70’);
506208 10006464 30M (95’);
506203 10006469 Dyna-Lock SRL, stainless steel wire rope, HL2000S, 10M (30’);
506205 10006467 16M (50’);
506207 10006465 22M (70’);
506209 10006463 30M (95’);
506330 Dyna-Lock SRL, stainless steel wire rope, HL2000s,
RoughneckTM version 10M (30’);
506331 16M (50’);
506332 22M (70’);
506333 30M (95’);
506615 10006447 20’ web Dyna-Lock, nylon, HL2000S;
10017931* 10017933* 20’ Wire Rope Dyna-Lock, stainless steel, HL2000S
*310 lbs maximum capacity.
No Factory Re-Certification;
On January 1, 2000, we eliminated our requirement for a factory re-certification on all of our mechanical
products. This policy change not only reduces the cost of ownership on MSA mechanical products, but it also
eliminates down time from returning a mechanical product to the factory for re-certification. With years of
proven success in our mechanical line of products, we are confident that the function of the unit, and the
safety of the user, will not be compromised by eliminating the requirement for factory re-certification.
NOTE: All users of MSA mechanical products are still required to perform a pre-use inspection and a formal inspection of each mechanical unit
in accordance with the user instructions, and as outlined in OSHA regulations,ANSI standards, and CSA standards.
The information contained within this publication is Copyright © 1976 - 2009, and to present, either by the individual manufacturers, The Safety Equipment Store®, or both parties. The Safety Equipment Store®, and, Your One Source For Workplace Safety®, are Registered Service Marks of S&E Industrial Supply Co., Inc. 1976- to present.
.jpg)
