Respirator Cartridges - Advantage® GMB P100 CL (Chlorine), SD (Sulfur Dioxide), CD (Chlorine Dioxide), HC (Hydrogen Chloride), HS (Hydrogen Sulfide) W/P100 HEPA P100-Particulate Filter (99.97% filter efficiency level) effective against all particulate aerosols, 99.97 percent efficient against 0.3 micron DOP, Priced 2 Per Package, By MSA, P/N 815363
Respirator Cartridges - Advantage® GMB P100 CL (Chlorine), SD (Sulfur Dioxide), CD (Chlorine Dioxide), HC (Hydrogen Chloride), HS (Hydrogen Sulfide) W/P100 HEPA P100-Particulate Filter (99.97% filter efficiency level) effective against all particulate aerosols, 99.97 percent efficient against 0.3 micron DOP, Priced 2 Per Package, 47317, By MSA, P/N 815363
The following information is general and applies to the entire Advantage® Line. The above product is limited in it’s design to filter to the indicated dusts, particles, mists, gases, or, vapors.
Product Information
The MSA Advantage line of particulate, chemical and combination cartridges is NIOSH-approved (to 42 CFR, Part 84) and provides lightweight, low-profile performance. MSA Respirator Cartridges fit both MSA Advantage 200 LS Half Face Respirators and MSA Advantage 3000 Full Face Respirators. Filter cartridges protect against dusts, particles and mists. Chemical cartridges protect against gases and vapors. Combination cartridges deliver protection from both particulate and gaseous contaminants. All cartridges are interchangeable between the Advantage 200 and 1000 respirators and are color-coded. Most are incinerable.
Principles of Operation
Designed for easy installation, Advantage cartridges use the latest bayonet-style mounting design. Featuring a low lug height and lead-in connectors, the cartridges lock into place with a single twist. An advanced engineering design makes negative pressure fit-testing easier to perform.
Approvals & Standards
The complete Advantage line of particulate, chemical and combination cartridges are approved under 42 CFR Part 84. The Occupational Safety and Health Administration (OSHA) requires fit tests to ensure proper fit for workers who use respirators.
Applications
Agriculture
Asbestos Abatement
Chemical
Construction
Electric Utility
Hazardous Materials
Mining
Nuclear
Oil and Gas
Paper & Pulp
Sanding & Grinding
Spray Painting
Welding
Hazards
Nuisance Odor
Particulate and Dust
Toxic Atmosphere Non-IDLH
Welding
Note: The item pictured is a GMA P100 as there was no GMB P100 picture available.
The information contained within this publication is Copyright © 1976 - to present, either by the individual manufacturers, The Safety Equipment Store®, or both parties. The Safety Equipment Store®, and, Your One Source For Workplace Safety®, are Registered Service Marks of S&E Industrial Supply Co., Inc. 1976 - to present.
.jpg)
.jpg)
.jpg)