GfG 2226001, IR22, Fixed Transmitter, Transmitters, Base Unit (no sensor), no display, 4-20 mA

IR22, Fixed Transmitter, Transmitters, Base Unit (no sensor), no display, 4-20 mA, GfG 2226001

IR22 D Series Fixed Transmitters by GfG Instrumentation

IR22 D Transmitter - CO₂ and flammable gases in view.

The IR22 D Transmitter, with display, for flammable gases and carbon dioxide. If you need to monitor carbon dioxide or flammable gases outside of Ex zones, the IR22 D transmitter is a durable and economical solution. The IR22 D transmits measured values and status displays via analog (0.2-1 mA or 4-20 mA) or digital (RS-485) signal, while also displaying them on site. In the event of an alarm, its internal buzzer will emit a loud acoustic warning signal. In combination with GfG's reliable controllers, the IR22 D can be installed in new gas detection systems or retrofitted into existing ones.

The IR22 D uses an infrared sensor (IR) to detect carbon dioxide and the combustible gases methane and propane. The current measured values are displayed on the 2.2-inch display, which lights up red in the event of an alarm. The long-life sensors make the IR22 D an economical solution for detecting gases in measuring ranges such as 0 to 10,000 ppm, 0 to 100 LEL or 0 to 50 % by volume. Its automatic temperature compensation and the linearization of the measuring signals ensure high measuring accuracy.

Functional safety and device protection

The hardware of the IR22 D complies with the European Functional Safety Standard DIN EN 61508-2: 2011 (SIL). The housing is protected against the ingress of dust and water (protection class: IP54). An optional weatherproof housing provides additional protection.

Communication and service

Signals are transmitted via the analog industrial standard (optionally 0.2-1 mA or 4-20 mA) or the digital RS-485 interface (Modbus protocol). The IR22 D uses two status LEDs to indicate its operating status. The built-in button interface facilitates service and adjustments on site (one-person adjustment). The multicolor backlit display shows the current measured value, status notifications and the menu of the IR22 D. Test gases for function tests can be inserted using a calibration adapter.

Key features and General Information at a glance:

• Measuring principle: Infrared (IR).
• For carbon dioxide and flammable gases.
• Expected sensor lifetime: > 5 years.
• Color 2.2-inch display, built in button interface, buzzer.
• Signal transmission: 0.2-1 mA / 4-20 mA / RS-485.
• Protection class: IP54.

Approvals / Certifications:

SIL 1/2 (hardware).

Optionally available:

• RC22 operating unit, weatherproof housing, calibration adapter.

Detectable gases:

CH₂F₂ Difluormethane/R32.

• 0 to 100 % LEL.
• 0 to 14.0 vol %.

CH₄ Methane.

• 0 to 100 % LEL • 0 to 5.0 vol %.

CO₂ Carbon dioxide.

• 0 to 1.0 vol %.
• 0 to 5.0 vol %.
• 0 to 10.0 vol %.
• 0 to 25.0 vol %.
• 0 to 50.0 vol %.

C₃H₈ Propane.

• 0 to 100 % LEL.
• 0 to 2.0 vol %.
• Other gases on request.

HAZMAT Item: No

New: Yes

Type: 2226001, IR22, Fixed Transmitter