Draeger 6813475, DrägerSensor® PID HC (10.6 eV)

DrägerSensor PID HC** 0 - 2000 ppm 0.1 - 10 ppm, Draeger 6813475

Dräger PID Sensor (P/N 6813475) DrägerSensor® PID HC (10.6 eV) Measurement Range: 0–2,000 ppm Isobutylene Resolution: 0–20 ppm / 100 ppb, >20–50 ppm / 200 ppb, >50–100 ppm / 500 ppb, >100–200 ppm / 1 ppm, >200–500 ppm / 2 ppm, >500–1,000 ppm / 5 ppm, >1,000–2,000 ppm / 10 ppm

PID sensors

PID (photoionization detector) sensors are the ideal choice for detecting low concentrations of volatile organic compounds. A PID is used to measure hazardous substance groups or can even be adjusted to measure individual substances.

PID sensor features:

• detection of volatile organic compounds in low concentrations
• compatible with: X-am 7000 and X-am 8000 - selective benzene measurement with pre-tubes possible
• measuring range: in ppm and ppb range

Detection of volatile organic compounds in the ppm and ppb range

The photoionization detector (PID) sensors complete the DrägerSensor series in the area of detecting volatile organic compounds (VOCs) in the ppm or ppb ranges. Therefore, these sensors are a useful addition to workplace monitoring with multi-gas detectors in certain applications.

Many different applications

PID sensor technology is very versatile and can be used, for example, for clearance measurements during shutdowns in the chemical and petrochemical industries, monitoring operations in shafts and enclosed spaces, detecting leaks and many other applications.

Benzene-specific measurements

Selective benzene detection can be carried out using the Dräger X-am® 8000 in combination with the benzene pre-tube. This pre-tube filters out all hydrocarbons present except for benzene.

Robust design

The Dräger PID detectors are equipped with water-repellent membranes to protect the integrated PID sensor during industrial use. The sensors also have very short response times and give a rapid warning.

Adjustment and response factors

PID sensors are quickly and simply adjusted using isobutylene. Isobutylene is a harmless gas that is available in practical, disposable, test gas bottles. Sensitivity to the monitored substance can then be individually set using response factors. This means that it can be calibrated on location at any time.

Optimized for the mission

Optimized for compatibility with original Dräger gas detection devices, so the PID sensors can be used to their full potential.

HAZMAT Item: No

Minimum Order Quantity: 1

New: YES

Quantity per Standard Package: 1

Type: 6813475, DrägerSensor® PID-HC

Unit of Measure: EA